RD1.7 RESPONSIBILITIES OF THE INSPECTOR
(see [II]:2.2)

The inspector, whether employed by the design professional or the University, shall:

1. Become thoroughly familiar with contract document requirements, applicable codes and standards, approved submittals, and all instructions or clarifications issued by the design professional.
2. Generally act as liaison between the contractor and the design professional.
3. Keep a log of written communications including submittals received from or issued to the contractor.
4. As appropriate to the nature and extent of construction, monitor the quality and quantity of the work and promptly report to the design professional nonconforming work or nonconforming work performance.
5. Prepare a daily report recording:
   • Inspector's time and activities on the project.
   • Weather conditions.
   • Nature and location of work being performed and by whom.
   • Number of workers by trade.
   • Oral instructions and interpretations given by the design professional.
   • Specific observations on results of oral instructions and interpretations.
   • Any occurrence or work which might result in a claim for a change in the contract sum or contract time.
   • Names of visitors, their titles, and the time and purpose of their visit.
   • This report shall be prepared for each normal work day or for each day on which the contractor performs work, and a copy shall be promptly sent to the design professional and the University.
6. Observe testing and inspection done by the contractor as required in the contract documents and coordinate and observe special testing and inspection when requested by the design professional or University.
7. Monitor the contractor's proposed schedule and the actual construction schedule and promptly report to the design professional discrepancies between the schedules and any conditions which may cause construction delays.
8. Periodically photograph the work, paying special attention to portions of the work that have been or may be rejected or may be associated with a claim or delay.
9. Review in detail the contractor's Application for Payment and report the findings of this review to the design professional.

The inspector shall not:

1. Authorize deviations from the contract documents.
2. Approve substitute materials or equipment.
3. Advise on or issue directions concerning aspects of construction means, methods, techniques, sequences, or procedures in connection with the work.

Back to Table of Contents

Back to Index of Figures